Product FAQs

Please reinsert the battery and try again. If it still does not operate, then try recharging the product.

If the product still does not switch on, then please contact Customer Service for a replacement if you are still within your 1 year warranty of your product.

Try removing the SIM card, check the position of the SIM card.
Refer to the user guide available with the phone and try again.

If the issue remains, contact Customer Service for assistance.

The Orbizz Phone will not work in Canada.
Yes. You can then see when you WiFi pass expires. You can also resend the activation email from your account if you need to.

There is a link on the product page where you can check.  You should always check before purchasing so you aren’t disappointed if we don’t cover the destination you are travelling to. You can also check here.

Yes global WiFi is unlimited but remember that if you have WorldSIM Infinity, you will pay data while you are not connected to WiFi, you will also pay for any calls and SMS messages.

You can check here to see where we have hotspots.

Yes, it’s the SIM plus a global WiFi pass. If you buy a solo global WiFi pass you can only get it for 1 month, with Infinity if you top up with the maximum amount you get a 12 month WiFi pass (for a much less than a month pass costs!)
Use the hotspot finder on the app to find the nearest WiFi hotspot to you. Although we are the biggest network in the world with 50 million WiFi hotspots, we do not cover everywhere.

Our introductory offer is for 3 devices. Once this offer expires it will just be for 1 device, you will be able to pay a small fee for additional devices

With the introductory offer you get 3 for free, once this offer expires it will be £5/$7.50 per additional device.
We send you an activation email, you click on the link to download the app. You can use the app to find a hotspot near you. Whenever you are within our WiFi zones we connect you so you can get online without the fuss of entering passwords. When the WiFi pass expires, you are able to purchase another one if you need one.
Please reinsert the battery and try again. If it still does not operate, then try recharging the product. If the product still does not switch on, then please contact customer service for a replacement if you are still within your 1 year warranty of your product.
Try removing the SIM card, check the position of the SIM card. Refer to the user guide available with the phone and try again. If the issue remains, contact Customer Service for assistance.

No. The Travel Genie is a basic handset and would not support roaming in 3G networks. It would also not support roaming in Japan, Canada and South Korea.

Please reinsert the battery and try again. If it still does not operate, then try recharging the product. If the product still does not switch on, then please contact customer service for a replacement if you are still within your 1 year warranty of your product.
Try removing the SIM card, check the position of the SIM card. Refer to the user guide available with the phone and try again. If the issue remains, contact Customer Service for assistance.

The WorldSIM Tri-Fi is really useful and very simple to use. Watch this video so see how to get started.

If you forget the login password and cannot enter Tri-Fi configuration page:

Press 'RESET' button for 3 seconds, device will be restored to factory settings.

The IP address conflict after Tri-Fi connection: Please ensure the same IP devices are not in the LAN.
After changing the security type (such as from WPA-PSK to WPA2-PSK ), computer with WINDOWS 7 system cannot connect to Tri-Fi: Please select the correct type of security in the Wireless Network properties.

If in 3G state, Tri-Fi is connected but cannot access the internet:

After switching to 3G state, check whether Data Indicator Light is flashing or not. Please ensure you have connected your device to the Tri-Fi

If Yes, please access the Tri-Fi setting page by opening your browser and typing 192.168.43.1
Username and Password is admin by default.
Click on Settings > Basic > WAN

Change Config mode to Manual
Dial Number = *99#
APN = mobiledata

Leave all other fields blank, click on Apply,
Tri-Fi will restart.

If the Tri-Fi does not work, try the following methods:

Please make sure you have switched the Tri-Fi to the correct mode/state
Ensure the APN settings are correctly configured. Refer to the Set Up APN in 3G Mode question on how to do this.
Make sure you have sufficient balance in your SIM.
Restart the Tri-Fi.
Restore to Factory Settings.
If Battery power is low, please fully charge then turn on.

Watch a demo of the Tri-Fi on youtube

 

Contact our Support Team.

Yes, you can use both features simulataneously, however the powerbank output will be lesser meaning it will take longer to charge your device.

Please make sure you are using the Output USB port to charge other devices, the input port is used for charging the Tri-Fi

Log into your account online at www.worldsim.com
When the 'My Account' Home Page appears, your available balance will be displayed next to your phone number.

Alternatively dial 187 to see your balance from your handset or mobile device

Please use the below guide to set up an APN.

Alternatively you can download the Huawei HiLink App from the iOS App Store or Google Play store to carry out this process. https://accounts.worldsim.com/Data-Roaming/WorldSIM-3G-WiFi-Device-Set-Up.pdf

Further information can also be found at http://consumer.huawei.com/en/mobile-broadband/mobile-wifi/index.htm

If you notice that your data SIM card is not working.

Then do the following:

1. Ensure you have sufficient credit in your SIM.
2. Ensure you have correctly set up your APN and Data Roaming is enabled. You can follow the APN guide in the How to Set Up APN question
3. Once you have completed setting up the APN try manually searching and connecting to the recommended network provider for the country you are roaming in.

Log into your account online at www.worldsim.com
When the 'My Account' Home Page appears, your available balance will be displayed next to your phone number.

Alternatively dial 187 to see your balance from your handset or mobile device

Upon inserting the Device to your PC, please select Setup.exe or the set up file and complete the installation.

Once done the application will automatically launch, you can then connect to the internet by setting the APN.

Use the below guide
https://www.worldsim.com/html/guides/USB-Connect-Failed.pdf

You can download the Huawei HiLink App from the iOS App Store or Google Play store to carry out this process.

After inserting the WorldSIM data SIM and connecting your HUAWEI modem to your device, open a browser and access the web management page via http://192.168.8.1
the default username and password is admin.

Click on the Settings Tab and select Dial Up 
Profile Management >
New Profile
Profile name = WorldSIM
APN = mobiledata
Leave username and password blank and click save.

Select Mobile connection under Dial-up and enable data roaming.
Press OK if any messages appear.

Further information can also be found at http://consumer.huawei.com/en/mobile-broadband/mobile-wifi/index.htm

Please use the below guide to set up an APN.
http://consumer.huawei.com/en/mobile-broadband/wingles/features/e8372.htm

Alternatively you can download the Huawei HiLink App from the iOS App Store or Google Play store to carry out this process.

Further information can also be found at
http://consumer.huawei.com/en/mobile-broadband/wingles/index.htm

Yes, you can.

HUAWEI Modem

APN Setup Procedure

  • Under the Network display on the home page click on Profile Management > New Profile
  • Profile name = WorldSIM
  • APN = mobiledata
  • Leave username and password blank and click save.

Select Mobile connection under Dial-up and please check if the Data Roaming is Enabled. It should be Enabled. Press OK if any messages appear.

ALCATEL Modem APN Setup Procedure
PS: You can also download the Alcatel OneTouch Link App from the iOS App Store or Google Play Store to carry out the below process.

After inserting the WorldSIM data SIM and connecting your ALCATEL modem to your device, open a browser and access the web management page via http://192.168.1.1
the default password is admin.

Under the Settings tab select
Profile Management >
New Profile name = WorldSIM
Dial Number = *99#
APN = mobiledata

Leave username, password and protocol field blank and click save and set as default.
Please enable automatic roaming under Settings > Connection Mode.

You may need to reboot your modem for changes to take effect.

Further information is available from
http://www.alcatel-mobile.com/global-en/products/mobile-broadband

If you insert a SIM card, the watch can be used as a standalone smartphone on your wrist, it will allow you to make calls, receive and send SMS and browse the Internet. Bluetooth will allow you to sync contacts, play music and also allow access to features that you would normally access on your smartphone on your smartwatch. The features that you can access on Android and iOS devices differ.
No, the Smartwatch only supports GSM 2G networks.

APK is the abbreviation of Android Package including BT Notification

Android. APK Download:
Open the QR code on the watch > Scan it by using a QR code reader phone > Download the APK > Install the APK on your Android smartphone.

If the watch mode is set to company mode/flight mode, please change it into normal mode and you can make calls,use network, etc.

Please ensure you have put the safety switch on the correct location
Open the first cover, twist it after opening and then further twist the pen part to reveal the refill cardtridge.
Twist the bottom silver part of the pen, to reveal the ball point pen.
Try recharging the Power bank first. Once done then try charging your devices.
Twist the bottom silver part of the pen, to reveal the ball point pen.
If you do not have your charger along with you, open the bottom silver part of the pen to reveal a USB 2.0 port, and then twist the middle of the pen to reveal a small micro USB port. Connect the USB port to a PC or laptop and connect the micro part which is extendable to your phone. It should charge just fine.
Open the bottom silver part of the pen to reveal a USB 2.0 port, and then twist the middle of the pen to reveal a small micro USB port. Connect the USB port to a PC or laptop and connect the micro part which is extendable to your phone. It should prompt for a connection to the PC in your phone and you can start transferring.
Twist the bottom silver part of the pen, to reveal the ball point pen.
Open the first cover, twist it after opening and then further twist the pen part to reveal the refill cardtridge.
The size is 8GB.
Try using new batteries to check if it is working or not.
Yes, if your handset supports bluetooth devices. Pair it with your device and you can use it to take pictures
Absolutely, it is safe.
You get a ball pen, 2 screw driver modes, a stylus, a measuring rule with cm and inch side, a bottle opener and a phone stand to watch videos or movies.
Open the first cover, twist it after opening and then further twist the pen part to reveal the refill cardtridge.
Twist the pen part and take it out, to find the Stylus.
Twist the pen part first, then twist the Stylus part to reveal the screw drivers head.
The Samsung SD Card should work with any device, please check your device compatibility. Some devices can take cards upto a certain size, i.e. 16GB, 32GB etc.
Ofcourse, as long as your storage card is with you, it should be fine. MicroSD cards have data retention upto 10 years if not formatted.
Yes, you can play HD video files using these cards. A high data speed is all it is built for.

The iPhone & Android Dual SIM Adapter is very easy to use, this video will show you how to get started. Play Video

The iPhone Dual SIM Adapter enables you to use two SIM cards with your iPhone. The adapter connects your iPhone to a second SIM card using a Bluetooth connection and a dedicated iOS app.

Both SIM cards are active simultaneously and the adapter enables you to make calls and send SMS messages using your secondary SIM card but mobile data use is not supported.

The adapter works on GSM networks.

No, Mobile/Cellular Data only works with the Primary SIM card which is inserted in your iPhone.

The Dual SIM adapter allows using two active SIM cards at the same time on your iPhone, transforming it to a dual SIM phone without jailbreak.

You can make and receive calls, send and receive SMS messages with two SIM cards simultaneously without having to carry several phones.

Manage your calls and messages on two active SIM cards from the screen of your iPhone and centralize all SIM data (contacts, SMS, call logs) on one phone.

No, the device is compatible for iOS 7 devices and later.
Micro SIM card only.

Please download the moreCard app from the iOS App Store.

Alternatively use the URL https://itunes.apple.com/us/app/morecard/id1001848150 to download the application.

<3 hours for continuos talktime. Standby time: 42 hours.

Please make sure APP Phone is in working range and working.

Please make sure that SIM card is registered successfully with the network, with Carrier's name listed at the top area.
Green LED should be flashing slowly.

Make sure that the device has enough charge, if not, try recharging.

If this doesn't help switch off the device remove and reinsert the SIM and re-connect.

If you are requested to enter a device password when opening or connecting to the app, the default password is 0000

After inserting the WorldSIM data SIM and connecting your ZTE modem to your device, open a browser and access the web management page via http://192.168.0.1 the default password is admin.

Go to Settings > Network settings > Dial-up Settings > make sure to enable the Roaming Status.
Then go to APN > Change Mode to Manual and enter the below.

Profile name = WorldSIM
APN = mobiledata

Leave username & password fields blank and click Apply
Go back to the APN settings, and select Manual, Select the WorldSIM profile from the drop down list and Set as Default
Go back to the Home screen and click on Connect, located on the left hand side of the Settings window.

Press the Power and WPS buttons together for 3 seconds, the device will restart

If you have any further enquiries, please contact us using the Contact Us - Submit Enquiry Form.